0-500SLPMA Minimum Analog Voltage Output Maximum 5VDC

Device Specifications

• Flow Range: 0 to 300 SLM (Standard Liters per Minute)
• Analog Voltage Output (3):
• Minimum: 1 VDC;Maximum: 5 VDC
• Zero Point Voltage:
• Minimum: 0.95 VDC;Maximum: 1.05 VDC
• Zero Drift: Up to 0.2% of Full Scale (%F.S)
• Resolution (4): 0.1% of Full Scale (%F.S)
• Load: Up to 100 KΩ
• Definition:
• Minimum: 2% F.S.,Maximum: 3% F.S.
• Response Time:
• Minimum: 1 msec,Maximum: 3 msec
• Supply Voltage (5):
• Minimum: 8 VDC,Nominal: 12 VDC,Maximum: 24 VDC
• Supply Current:
• Minimum: 20 mA,Maximum: 30 mA
• Overall Material: Silicon carbide, epoxy, PS (possibly Polystyrene), FR 4 (a type of fiberglass-reinforced epoxy laminate), silicon as seal
• Customization: Indicates differentiation in materials used.

Interpretation and Notes

1. Flow Range: The device measures flow rates from 0 to 300 Standard Liters per Minute (SLM).
2. Analog Output: Provides a voltage output ranging from 1 to 5 VDC corresponding to the flow rate.
3. Zero Point Stability: The zero point voltage remains stable within 0.95 to 1.05 VDC, with a maximum drift of 0.2% F.S.
4. Resolution: Specifies the smallest increment of flow that can be detected, set at 0.1% of Full Scale.
5. Load and Definition: Defines the electrical load capacity and the accuracy tolerance (2% to 3% of Full Scale).
6. Response Time: Indicates how quickly the device responds to changes in flow rate, ranging from 1 to 3 milliseconds.
7. Power Requirements: Operates on a supply voltage ranging from 8 to 24 VDC, with a current draw between 20 to 30 mA.
8. Material Composition: Lists materials used in construction, highlighting silicon carbide and various types of epoxy and laminate.

500SLPMA mems air flow sensor

5V mems air flow sensor

5V pressure transducer

0-500SLPMA Minimum Analog Voltage Output Maximum 5VDC Images